About fully automatic oil press cost-effectiveness

What is a fully automatic oil press equipment

The automatic oil press machine is a new type of automatic screw oil press machine composed of a pressing chamber, a feeding device, a screw assembly, a cake correction mechanism, a gear box and a motor. The oil press can adjust the appropriate temperature for different raw materials, has an automatic temperature control system, is easy to operate, and simplifies the complexity of frying. The reason why the fully automatic oil press is called fully automatic means that it basically does not require other operations except feeding, automatic temperature control, vacuum filtration, simple operation, small footprint, and high oil yield. Fully automatic oil press has advanced design, reliable performance, simple operation and convenient maintenance. It has the characteristics of high oil yield, labor saving, wide application, pure oil quality and small footprint.

What are the characteristics of automatic oil press

(1) Low-temperature pressed oil is light in color and rich in nutrients. After precipitation and filtration, pure natural oil can be obtained, which saves refining costs and reduces refining consumption.
(2) The degree of protein damage of the low-temperature pressed cake is small, which is conducive to the full utilization of oilseed protein.
(3) The pressing temperature is low (normal temperature 10°C~50°C).
(4) During the pressing process, the oil has not been in contact with any solvent, acid, alkali bleaching soil, or chemical additives. The processed oil and cake have little loss of nutrients and trace elements, and the protein content of the cake is high.

Application scope of automatic oil press machine:

This new multifunctional automatic oil press machine is suitable for pressing peeled rapeseed, peanut kernel, soybean, olive, walnut kernel, corn germ, rice bran, tea seed, safflower seed, sea buckthorn seed, neem seed, rubber seed, pepper seed , tomato seeds, watermelon seeds, grape seeds, linseeds, evening primrose, chili seeds, castor beans, citrus seeds, cocoa beans, coffee beans, basil, almonds, peach kernels, rose hips and other vegetable oils.

Fully automatic oil press processing technology

1. Working principle of automatic oil press:

When the automatic oil press machine is running, the processed oil enters the press chamber from the hopper. The material embryo is continuously pushed inward by the pressing screw to carry out pressing. Because the raw material is in motion in the press chamber of the oil press, under the condition of high pressure in the press chamber, there is a great frictional resistance between the raw material and the snail, and between the raw material and the press chamber. It can cause friction between the raw materials and micro-materials, resulting in relative motion.

On the other hand, since the diameter of the root garden of the snail is gradually thickened, the pitch of the screw is gradually reduced. Therefore, when the snail rotates, the thread pushes the embryo forward and turns outward, and at the same time it is close to the screw thread. The material layer on the surface also rotates with the pressing shaft. In this way, each material embryo particle in the press chamber is not moving at the same speed and in the same direction, but there is also relative motion between the particles. The heat generated by the friction meets the heat required for the operation of the oil extraction process, which helps to promote the thermal denaturation of the protein in the embryo, destroys the colloid, increases the plasticity, and also reduces the viscosity of some, which is easy to precipitate oil. The oil yield rate of the oil press is improved, so that the oil in the material is squeezed out and flows out from the gaps in the garden row and the row row.

2. The composition of a complete set of automatic oil press equipment:

The automatic oil press machine is a new type of automatic screw oil press machine composed of a pressing chamber, a feeding device, a screw assembly, a cake correction mechanism, a gear box and a motor. The characteristics of the screw oil press are that the horizontal and vertical augers work synchronously, the press chamber is axially split, the chamber shell is fixed with a dovetail groove single bolt pressing block point, the chamber shell opening and closing adopts a hinge structure, and the cold-warm Structural cooling; the screw general stroke is a segmented structure, a labyrinth sealing gasket is used between the screw and the bushing, and an anti-leakage screw is set on the side of the screw. This machine has the advantages of novel design, reasonable structure, automatic and manual cake correction function, can open and clean and replace wearing parts without stopping the machine, has the advantages of large processing capacity, low energy consumption, small footprint, and low cost.